The all-in-one baling and wrapping machine adopts thickened wall plates, which are not deformed by welding, and have high concentricity between the aluminum rollers between the shafts and low failure rates. The production process of the external bearing device makes it easy to maintain. Features: Compared with similar products, the all-in-one baling and wrapping machine has stable operation, high work efficiency, easy maintenance, and saves labor and effort. After each use, we should do a good job of maintenance, clean and maintain it. , otherwise it is likely to affect its life and affect the next use.
In recent years, with the improvement of people's living standards, the improvement of rural energy structure, and the cost of straw collection, sorting and transportation, the comprehensive utilization of straw has lagged behind. Especially in some major grain-producing areas, farmers have repeatedly sown and burned straw in order to compete for agricultural production. become a social issue. How to rationally utilize corn straw and combine the promotion of comprehensive utilization of straw with agricultural efficiency and farmers' income increase have received more and more attention. For fresh corn straw, silage is undoubtedly an effective method of utilization.
Maintenance method of all-in-one baling and wrapping machine
1. Please inject hydraulic oil before starting the baling and wrapping machine. The hydraulic oil type is suitable for local climate conditions. The oil level must reach the scale.
2. Carefully check the power lines to prevent trouble spots and leakage to ensure stable power consumption.
3. Carefully check whether the bolts and screws at the connection parts of the machine motor and transmission parts are firm and whether there is any looseness, so that they can be tightened in time.
4. After starting the machine, let the machine idle for 2 minutes to check whether the machine is rotating normally. Only when it is normal can the material be fed evenly.
5. Before loading the machine, be sure to pay attention to hard debris in the raw materials and prevent stones, iron blocks, etc. from entering the silo to avoid damaging the machine.
6. During the extrusion process, the operator holds the joystick and pushes it back and forth. If there is any abnormal sound, immediately close the hydraulic control valve, then turn off the power, carefully check the fault and eliminate it.
7. Do not put your hands, sticks, or metal objects into the compression chamber during operation of the packaging and packaging machine to avoid harm to the human body.
8. Check the hydraulic system regularly and add hydraulic oil in time. Ensure the normal operation of the packaging and packaging machine equipment
9. Non-professional operators should not get close to the packaging and packaging machine to avoid personal accidents.
