introduction of 2024 new design film bundle film wrap Automatic corn silage packing machine silage baler machine for round bales

The all-in-one silage baling and wrapping machine consists of two parts: baling and wrapping. The fixed bin is manually fed through the front of the machine. When the bale is so large that the fixed bin and the movable bin come into contact with a certain density, the inertia above the movable bin The roller and the signal wheel on the left will rotate evenly, and the operator will move the winding clutch handle, and the machine will start to reciprocate the rope bundling. After wrapping the rope for one week, the hemp rope will be automatically cut off, the bin will be opened immediately, and the bale will fall directly into the wrapping machine. On the rotating frame, pull out the film by hand, activate the rotating button, and the rotating frame drives the bale to rotate. The operator should quickly press the film to the bale simultaneously, and rotate with the bale for a circle, and then immediately let go, and the grass film gradually The straw bale is wrapped layer by layer, and the straw bale automatically rotates with the rotating frame. When the wrapping reaches the set number of layers, the clutch automatically disengages, the rotating frame stops, and the operator holds the film between the straw bale and the film transfer frame. Cut off the pasture film, press the broken end of the pasture film into the overlapping end of the bale, use one person to move the wrapped bale into a trolley, push it away and place it neatly

The bearing is 204, the shaft can be pulled out independently, and the film can be cut by an automatic cylinder, saving 30% of the film than the old model.